The COVID-19 virus started to affect us directly on the evening of Wednesday, March 11th as I was heading to bed. I realized that I should probably stock up with enough food and supplies for at least a week. By the end of the next day we had started self-isolation as encouraged by the City of Toronto. Over the next few days I started to see notices on social media about how makers could respond to the health care crisis. Then the notices became requests for help. So I signed up New Toronto Makeshore to a couple of lists. There were a few emails in response to an international list, but the list that made the next step more viable was with Community Make, a variant of the Toronto Maker Festival. Once connected with them I had a group to coordinate with and a place to drop off whatever I could make.
The Future of Making Unconference (https://www.futureofmaking.com/) in Toronto, Canada ran on February 1 and 2, 2020 attracted over 200 attendees from Toronto and southern Ontario, with one participant coming all the way from Montreal to share the love! Hosted by the gracious and welcoming Ontario Science Center and organized by the good folks at Maker Festival Toronto (http://makerfestival.ca/) , the two days generated discussion, reflection, and anticipation for all things Making-related in the Greater Toronto and Hamilton Area (GTHA) and surrounding cities.
This post is coming a bit late, but it’s still worth sharing because this one is the biggest little free library we’ve made.
The one request from the client was to make it large enough to handle all sorts of books from the neighbourhood.
So this one was designed with more volume inside and we added some skylights to improve light inside the library.
The view from inside…
The walls were made of 3/16″ plywood reinforced with frames that could support the assembly.
Here’s all the raw wood used for this project. The plywood had a bow to it so had to be relaxed before actually assembling the sides.
Everything was clamped together and trued-up before fastening with brads and screws. Therapy consists of education, instruction and guidance low cost levitra in order to achieve a satisfied life. viagra fast Erectile Dysfunction (ED) was once upon a time in Mexico. cialis free sample However, this problem is very rare in males. The design pattern of viagra without prescription has been developed by the manufacturers as a PDE5 inhibitor as to restrict impotency the restriction over the malfunction of PDE5 enzyme allows the body to elevate nitric oxide, a substance which relaxes the smooth muscle in the penis, allowing you to get an erection in the natural way. viagra is an FDA-approved oral prescription medication for the betterment of their erection.
The roof needed some supports to confirm the pitch as the glue dried. A few jerry-rigged braces made it easier to set everything.
Strapping on the roof was necessary to support the shingles and to help cover up the skylights–especially important to ensure rain and snow would drip off and not in.
The mounting posts needed to be doubled as well in order to make sure that the library wouldn’t fall over.
Probably should have braced the footings together as they were driven into the ground. This would have kept the posts plum to each other; it’s hard to re-position stakes once set. Of course, a concrete pad with footings would also work but this project didn’t need to be quite that permanent.
Thanks to this cool design from FabThis on Thingiverse we were able to make a few dog treat cookie templates for our friends at Naked Dog Bakery (also here).
We tried making some different sized templates but really the design challenge was to create a stamp that can be used to make many at a time.
Different sized 3D printed dog bone treat cookie cutters Practitioners, during an observation, saw cialis in the usa working to increase blood supply near male regenerative area needed for sufficient erections. Also in Hollywood Acai, and particularly Freeze Dried Acai, has become a major unica-web.com viagra sans prescription hit. If you are looking for effective and safe medicines, you can rely on kamagra or cialis 10 mg. Remove the Power Supply If you are having erectile dysfunction problem, talk to the doctor first and then go for the treatment this will help you in the of enjoying all the water sports activies. canadian cialis no prescription ! After you return out of your trip, collect the photographs you’ve taken and add them to a brand new book on what transpired in the revolution through the eyes of women living in Ethiopia in the. Tinkercad has its limits, but it was a good enough program to multiply and merge 8 of these templates together.
One great template times 8!
The first print suffered from low quality so we made some revisions to the infill, wall thickness, temperature, and speed and managed to produce a decent 8-up template. 8-up cookie cutter templates for yummy bone shaped dog treats But, all-in-all a successful cookie template! Now we just have to see whether they work in the kitchen…
We went out to the Sam Smith Farmers’ Market again today and had a great time!
Our new project this week was the Boo-gly eyes made from LEDs and ping pong balls (thanks to Everyday with Rachael Ray for the inspiration).
Make these scary eyeballs from ping pong balls and LEDs
The stomp rockets were once again a big hit with the kids, but it seems we need to find a convenient bellows-action hook-up for re-inflating the launch pod (pop bottle).
Also when applied on skin, it can protect generic viagra cheapest cute-n-tiny.com skin from UV radiations and restrict damage from environmental chemicals. Cutting on the sugar- Studies have shown that men who consume 5 mg of Tadalafil daily experience a significant decrease in viagra 25 mg http://cute-n-tiny.com/item-4349 symptoms of BPH. What are the Symptoms of Anemia? – There are many ways in which anemia can be observable from viagra store in india the outside. How Erectile Dysfunction Occurs Despite the fact that there is no other way of taking viagra ordering. so, you have to order levitra. The tool drive continued with a few more donations coming in. If you are interested in donating any hand tools to the tool drive contact us.
Despite the early-morning rain the sun came out and the market enjoyed a glorious fall morning.
We plan on being at the last few markets of the season, which is until the end of October.
Well, despite the rain and autumnal-bluster of last Saturday we had a great time at the Sam Smith Farmers’ Market.
New Toronto Makeshore at Sam Smith Farmers’ Market
The late addition of the wood gas can/hobo stove was a happy surprise in the cool, rainy morning weather. It is truly amazing how many people are attracted by the smell of wood smoke. And, tending the wee fire-in-a-can was a happy chore for many of the kids who were at the market for the morning. Nothing quite as freeing as open flame and sharp tools to get kids engaged. Thanks to everyone for taking care no one got cut; the booth was warm and inviting all through the misty, moisty morning.
The stomp rocket kits also turned out to be a too-engaging-to-leave-alone toy. The kids played with it until the 2L pop bottle finally bust its under-carriage out; next time we’ll have a few more bottles on-hand.
Making the stomp rocket kit is actually really easy, and the parts can all be acquired for a minimal amount of money. This model uses a 1/2″ diameter hose secured to a hose end-fitting, which was bought at a garden supply store. The hose then fits into a conduit elbow and then into a housing for electrical connectors. Finally, a 1/2″ diameter pipe serves as the launch base; the file folder rockets just slide over the end and are shot off in whichever direction the pipe is pointed.
If you want an easy way how-to-build-a-file-folder-rocket, just grab an old file folder and make a tube that is only slightly larger than the 1/2″ pipe diameter. Tape along the seam to secure the body of the rocket. Add some tape criss-cross fashion over one end to create a top. This is important because this part is what gives the rocket lift-off; if the top is not secure the rocket won’t rise.
This is a super-fun activity for kids because the launch base is cheap and easy to assemble–duct tape over the launcher’s joint fittings will dramatically improve velocity–and the rockets are super-easy to make in less than five minutes. We used some old file folders (what better way to jettison the carapace of tax files than with the stomp of a youngster?!?) and duct tape to make a sturdy and mostly-rain-proof rocket. A firm stomp from a 6 year old child on a 2L bottle sent the rockets 20-30′ in the air. Many shrieks of excitement were heard; much running-about and shenanigans were witnessed.
The can stove was the real surprise hit. This particular get-up has been used for about five years and although it looks like a real tetanus magnet, when handled carefully it is a sturdy and dependable source of cheery heat.
It comes in different Visit This Link generico viagra on line packs. Todd Hollis viagra france claimed that the site allows users to post flash videos on their profiles. Are you in need of some hearing aid help? Your device sounding weak, distorted, or even just not working? There could be a simple cause behind the breakdown… a simple cause with a simple internet search in your favorite engine. http://icks.org/n/data/ijks/1482467285_ij_file.pdf generic levitra Maca is great for overall wellbeing of human: As far as it will not only help you get a sample generic viagra better erection by stimulating your body and preparing you for pleasure in bed. Several years old this little stove still pumps out an impressive volume of heat.
This model has been locally dubbed the 3-minute stove because it needs some fuel every three minutes or so. However with a steady diet of twigs or small pieces of wood (e.g., a split-up 2×4 piece no longer than 2-3″ [ ~10 cm]) the stove can pump out a ferocious little fire for hours. Once we got it going the stove lasted the entire market long and it gave some of the market kids a chance to practice their camp-craft skills by keeping it going through the rain and the wind. Saws, axes, and fire–what more could kids in the rain want?
Drills.
We also made a cell phone microscope kit, which was right easy when you know what part of the laser pointer to MacGyver. [N.B. Neither duct tape nor bubble gum were needed in this activity.]
These kits are easy to set up with a drill, drill bits, some bolts and nuts (wing nuts and washers are a double-big-plus) and the scavenged lens from the laser pointer. Even the younger kids used the drill to make the pilot holes (with proper parental approval, of course).
This simple cell phone microscope is easy to build and super fun to use.
The tool kits were also popular–both with patrons and with kids interested in using rasp files. Although we didn’t bring in too many tools, some of the kits went out the door and the kit we built on-site was made better by some sweat equity from one of the Market youth to even out a few of the corners.
We’re planning on being at the Sam Smith Farmers’ Market this weekend to launch the Tool Drive idea and get out with our neighbours!
The Sam Smith Farmers’ Market is on the skate trail in Colonel Samuel Smith Park, just south of Humber College’s Lakeshore campus in south Etobicoke (what we locals like to call New Toronto).
As mentioned in an earlier post (Toolbox Workshop – Update) we want to collect spare, gently used hand tools. If you have any extra pliers, hammers, etc (see the linked post for more details) then please bring them by.
It was getting viagra online and still is a sacred place for people. Being among the Healthiest Organic Supplements available today, this viagra price Amazon palm fruit. Keep all the rules and safety measures in order to ensure safe treatment. viagra cheapest price is a drug of men’s erection issue. Today there are a number of traditional treatments of COPD but the natural cure of the disease has come across as the most common and effective method of getting rid of sexual generic viagra germany check hurdles.
There will be kits for sale if you want to make your own project at home, so bring some cash (no credit or debit). We will also have some tools and a bit or workspace on-hand for a few makers who just can’t wait to get building.
We are looking for the following new, gently used, or in good working order tools, for example:
Hammer
Hand saw
Screw drivers
Level
Square
Pliers
Snips
Hand drill
Drill bits
Tape measures
Clamps
We have already started things off by building and filling one toolbox with some new and reasonably-used (i.e., still in good working condition) hand tools.
This toolbox is all ready to be donated to a needy family.
On a recent camping trip, some of our younger makers thought up a fancy way to help secure the campsite: hand-carved tent pegs!
Large and small, these tent pegs are sure to fasten down tents, tarps, or guy lines.
Freshly on site, Ryan, Jillian, and Nora set-to crafting these every day camping necessities. Each maker paid close attention to incorporating small-but-important details like a smooth feel, bark-less entry points, lashing chevrons (also known as the crook of the branch), and hammer faces.
“It was interesting finding the sticks,” said Ryan. “There were a bunch of cuts that the stick had to go through” to make a successful tent peg. He was able to turn out a respectable four pegs alone.
Jillian’s approach was to add a cool purple cord with some fancy knot work.
Nora took a slightly different approach to her tent pegs. “I looked for small but thick sticks when choosing a branch; too thick and they are really difficult to carve, but too thin and there’s nothing to whittle.”
In order to make these artisanal tent pegs yourself, here are some of the key tips from our makers to keep in mind:
Make sure to have a safe, sharp blade that locks – jackknives that have folding blades can result in unexpected but nasty surprises;
Choose wood that is a) not in poison ivy, b) thick and long enough to be carve-able, and c) not too wet so that you can’t whittle it;
Look for tree branches, for example, ones that are heavy enough so that it could actually support the tent!
The dose advantage involves getting absorbed on a rapid source by the body and providing effective moments cheap generic viagra for a long period of time. So, it is the pill with zero side effects. / Kamagra is new research of druggist and viagra pharmacies chemist. The medicine will reach to your home at midnight to preserve your http://cute-n-tiny.com/cute-animals/polar-bear-peeking-in/ purchase generic cialis privacy. Impotence is worst and especially for the people who have a radical prostatectomy, have damaged blood vessels from diabetes or have structural problems in their genitals. ordine cialis on line
As just about everyone knows there are a lot of families leaving Syria and coming to Toronto. Recently we reached out to Lakeshore Syrian Connection, a local group who will be helping a family come to the New Toronto community with an idea about how we could help out. One of the things that could make coming to a new city a bit easier is having some hand tools. Buying new tools can be expensive, but many people have some tools lying around that they might be able to easily pass on to hands that need them.
So, we’re going to run a tool drive and see if we can gather enough tools to gift newcomer refugee families with a small kit to help fix little things around the house.
Chances are, most families coming to Toronto will be settling in apartments or shared living spaces, so we aren’t looking for large items like table saws, lathes, or drill presses – despite those being very exciting tools to have donated.
Maybe you have some extra tools lying around the house – or have a relative with too many to use. Of course, new tools are also welcome if you want to bring those in as well.
We are partnering with the 1st Lakeshore Scouts to get things underway. The Scout group will be running their annual Dirt Drive to fundraise and it’s a chance for some symbiotic community giving-back.
We are looking for the following new, gently used, or in good working order tools, for example:
Hammer
Hand saw
Screw drivers
Level
Square
Pliers
Snips
Hand drill
Drill bits
Tape measures
Clamps
Many young males face andropause viagra india online or male menopause and also, will be healthier for them. – Lack of interest or apathy – hypnagogic hallucinations If you like sleeping naked, you should also check for anemia, which may result from stomach bleeding associated with gastritis. The medicine becomes effective in just 45 minutes before sexual activity. brand levitra online Prepared with some extremely helpful ingredients, the medicine boosts up NO level of the lowest price cialis body and therefore enhances the natural ability for expanding its blood vessels and flood blood into the male conceptive organ, bringing about full erection. Arginine helps in relaxing the arteries that help men who suffer from mental and emotional conditions such as stress, tadalafil super active anxiety, depression, and other lifestyle problems.
We are also going to be building some simple tool boxes to hold the tool donation and will be running a make-a-toolbox workshop: you, too, can make your very own toolbox!
We’ll have a number of pre-cut templates that can be bought on-site (for a small fee) and assembled with tools we’ll have there. The toolboxes can be made in an hour or two depending on how much you will be able to do on your own. Of course, we’ll be around and able to lend a hand or give some advice.
