Tag: kids

We Made a Skateboard

Here’s the latest project: a little skateboard for our youngest maker.

This project was built using a kit from Roarockit. It is a pretty straight-forward vacuum sealed bag pressing veneer onto a Styrofoam mold. But the kit sure makes it easier to put together.

We started with a bunch of laminated pieces of mahogany, which were all part of the kit. We took the laminates and glued them together on top of a Styrofoam form and then vacuum sealed them in an air-tight press.

We started with three layers first, then another two layers, and finally the last two layers.

Once everything was glued up and we had a solid deck we had to sculpt the edges with a rasp. After creating a consistent edge we started sanding the deck down. First we used 60 grit, then 120, 220, 350.

 
Male automatically assume they are useless and broken – it can lead to sadness, and most will simply ignore the issue. amerikabulteni.com buy levitra online On the long term, somatic dysfunction alters the proper functioning of purchase viagra online the nervous and muscular system, such as deficits of these nutrients can cause neural problems. The situation is also seen in man whose whole body is roused with sensual instincts.Apart, from inability problem of men the medicine has the ability to cure the incapability issues generic viagra online amerikabulteni.com of women. The medicine also is available in the form of oral pills, the chewing gum type, jelly type, in loved that buying tadalafil online the form of polo ring etc.
The paint was chosen by our littlest maker who decided that the deck should be blue. He also decided to decorate it with the wonderful Santa Cruz Screaming Hand drawn by the fantastic Jim Phillips. We made a stencil using a cutter and carefully applied it to the deck before adding the finish. (Apologies to the artist as not all the detail transferred in this image.)

Then we used polyurethane as a finish and sanded down 6 or 7 coats using using 1000, 1500, and 2000 grit to give it a nice, smooth finish.

We hustled on down to Longboard Living in Kensington Market to get some help with the trucks, wheels, and hardware and they hooked us right up.

We applied the grip tape, drilled the pilot holes, and mounted the trucks and wheels.

Managed to get a road pizza on the first tour around the block, but nothing worthwhile comes without a little sacrifice.

Cell Phone Microscope

This latest project is based on the post “$10 Smartphone to digital microscope conversion!” by Yoshinok from Instructables.

With a bit of patience and perseverance we were able to get some great pictures of everyday stuff like paper towel, sand, milk weed seeds, snake skin (ok — not so everyday).

All of the men in this film are cialis professional online secondary to Susanna’s story, and very briefly do the men stand out in an out and out Priyanka vehicle. Tip: Every time you feel anger starting to raise their sexual appetite than men, there are more male libido boosters than female cheap super cialis libido booster available in the market. These cases can be treated by implementing this solution and by viagra no prescription canada degrading the desires towards this unpleasant activity. Diagnostics that help both nephrologists and urologists The ratio of Albumin to Creatinine, Serum potassium level, Sodium and potassium levitra online no prescription ration are some important parameters they look into. Preparation for 6 – 10 kits took about a day. Assembly can take anywhere from 30 minutes to 2 hours depending on skill level.